Windows 8 Support

  • Subscribe to our RSS feed.
  • Twitter
  • StumbleUpon
  • Reddit
  • Facebook
  • Digg

Tuesday, 12 November 2013

Commitment to Change

Posted on 10:00 by Unknown
We all believe that we are good at 'change'. We are 'champions of change'. But is that really true?
  • Why are people, in general, so resistant to change?
  • What does it take to implement change (personally or professionally)
  • What is the one key attribute?
RESISTANCE TO CHANGE
There are multiple phases people go through during change:



These phases are inevitable, it is only our external response we have control over.

WHAT DOES IT TAKE TO IMPLEMENT CHANGE

In every successful change implementation it takes three key elements, without these keys, the change is doomed at least to a bumpy road, and probably to either under-achievement or failure.

  • Upper management buy-in. This cannot be under estimated. Without executive buy-in, the change is destined for stalling. Mid-level management will test the business resolve of upper management and can smell weakness in a heartbeat. Momentum is lost, and delay is what happens. 
  • Have a plan. Seems obvious, but much of change happens without a fully resolved and documented plan. Firms implementing change often say 'we are really smart and we will figure it out'. This is misguided and often leads to delay of change. Hire a qualified consultant, with resources to bring to the table, and give implementation consultant the input needed for a plan that is both reasoned and documented.
    • What problem are we trying to solve?
    • What are we willing to do to assist?
    • What is our corporate culture and what works best for our type of company (not based upon budget, but upon other successful change).
  • Define Conditions of Success.  See my blog -  http://connectingthedata.blogspot.com/2013/11/when-am-i-done-why-is-customer-unhappy.html Success requires a goal line. A mutually agreed goal line. Then the change needs to be constantly measured against the goal line. This is different than metrics. Here is an example:   
A project requires a new software to be implemented. The existing software opens in 1 second. The new software opens in 2 seconds. The metric says 100% decrease in performance (2 seconds vs. 1 second). The Condition of Success is the user should not notice the change from using existing software to new software.  

The problem is that metrics (numbers) can be manipulated to either forecast failure or promote success.  Metrics are not the only predictors of change success.  A defined and agreed upon Condition of Success will be a better indicator of a successful implementation than metrics.

ONE KEY ATTRIBUTE
What is the one crucial part?. Commitment. Commitment by all the parties involved, the customer and the consultant. Commitment is more than "I will pay you if you provide this for me". Commitment is the dedication of management buy-in, consultant time and effort, customer involvement and response, and dedication to conditions of success.

Unless Greek mythology Sisyphus is your hero (http://www.merriam-webster.com/dictionary
/sisyphus
), look at your next change implementation from a different perspective.



David Haynes, NCARB, PMP, LEED AP
Ideate Director of Consulting

David is a Registered Architect, Project Management Certified Professional, who previously had his own architectural practice and was President of a commercial design-build construction company for 15 years. A graduate of University of Arizona, he has worked as an Architect, contractor, developer and as a national construction manager for a national retailer. David currently provides business process analysis, virtualization and change management solutions for AEC clients across the United States involved in the design and building industry. Follow David on Twitter: @dhaynestech 


Get it. Know it. Use it.

This post was originally published on David’s blog Connecting the [Data]… 
Email ThisBlogThis!Share to XShare to FacebookShare to Pinterest
Posted in change, David Haynes, Ideate, improvement, Lean, strategy | No comments
Newer Post Older Post Home

0 comments:

Post a Comment

Subscribe to: Post Comments (Atom)

Popular Posts

  • Civil 3D 2013: 2D and 3D Polyline Conversion
    While working on a grading I needed to change grades along a path that had been defined as a 2D polyline. Well, it is a fact that a 2D polyl...
  • Ideate, Inc. Welcomes Eugene A. O’Day, IX, to Tech Expert Team
    San Francisco, CA, 7/31/2013 – Ideate, Inc., an Autodesk Gold Value Added Reseller, today announced that Eugene A. O’Day, IX, has joined I...
  • Autodesk InfraWorks Tips and Tricks: JavaScript Support
    Here at Ideate, we are always on the lookout for helpful tips and tricks that might be of value to our customers. While attending Autodesk T...
  • Civil 3D Technology Preview – Corridor Solids for Civil 3D 2012
    How do you import a Civil 3D corridor into Revit or Navisworks? I was asked this question a couple of months ago while importing a Civil 3D ...
  • Civil 3D Subscription Download – Volumes Dashboard Extension for AutoCAD Civil 3D 2012
    Have you always wondered what happens to your Civil 3D subscription dollars? Well, Autodesk keeps on adding value for subscription customers...
  • Ideate, Inc. Publishes Jasmax and BVN Use Case Study in Success
    SAN FRANCISCO, California – 09/11/2012 - Ideate, Inc., a leading Autodesk® Authorized Developer and Autodesk solutions provider offering qua...
  • New Room Calculation Point Functionality in Revit 2014
    In coordination with the Ideate, Inc. YouTube video on Autodesk Revit 2014 - Room Calculation Point, this post describes how the Revit 2014...
  • Rebar Documentation and Concrete Modeling Enhancements in Revit Structure 2014
    Thank you for visiting Ideate’s blog to check out the new features added to Autodesk Revit Structure 2014. My name is Shruti Harve and I wor...
  • Import Street Centerline from GIS Data Straight to a 3D Model
    So you import GIS data into AutoCAD or Civil 3D to get AutoCAD lines and use it for design and analysis. What if you could import the .SHP f...
  • Exploded Axonometric Views in Revit 2014: No Problem!
    Thank you for visiting Ideate’s blog to check out the new features added to Autodesk Revit 2014. My name is Shruti Harve and I work as a Sen...

Categories

  • .NET 4.5
  • .NWC file
  • #ADSK2012
  • #ADSK2013
  • #adsk2014
  • #AU2011
  • #AU2012
  • #AU2013
  • 2014
  • 2014 Migration
  • 360
  • 360 account
  • 360 online options
  • 3D
  • 3D Axon
  • 3d design
  • 3d Object
  • 3d Scanning
  • 3D View
  • 3ds Max
  • 3ds Max 2014
  • 3ds Max Design
  • ACI
  • adoption
  • ADSK2014
  • AEC
  • AEC Application Specialist
  • AECbytes
  • AIA
  • AIA CEU
  • AIA LU
  • AIM
  • Air Terminal Duct Enhancement
  • Airborne
  • Alternate Dimensions
  • Annotation Scale Unit Scale
  • Apple Boot Camp
  • Architectural Project Manager
  • ASHRAE
  • Assembly Code
  • Asset Browser
  • assign pay items
  • ATC
  • AU
  • AU 2012
  • Aurecon
  • Authorized Training Center
  • AutoCAD
  • AutoCAD 2012
  • AutoCAD 2013
  • AutoCAD 2014
  • AutoCAD Architecture
  • AutoCAD Civil 3D
  • AutoCAD Civil 3D 2012
  • AutoCAD Civil 3D 2013
  • AutoCAD Civil 3D 2014
  • AutoCAD for Mac
  • AutoCAD for Mac 2013
  • AutoCAD LT
  • AutoCAD Map 3D
  • AutoCAD Mechanical
  • AutoCAD MEP
  • AutoCAD MEP 2012
  • AutoCAD MEP 2013
  • AutoCAD MEP 2014
  • AutoCAD Plant 3D
  • AutoCAD WS
  • Autodesk
  • Autodesk 2014
  • Autodesk 360
  • Autodesk 360 account
  • Autodesk 360 Settings
  • Autodesk 3ds Max Design
  • Autodesk 3ds Max Design 2013
  • Autodesk Authorized Certification Center
  • autodesk authorized developer
  • Autodesk Authorized Training Center
  • Autodesk Autodesk Authorized Training Center
  • Autodesk Autodesk Revit MEP
  • Autodesk Certification
  • Autodesk Certified Instructor
  • Autodesk Civil Infrastructure Specialized
  • autodesk cloud
  • autodesk community
  • autodesk construction specialization
  • Autodesk Consulting Services Partner
  • autodesk corrupt file
  • Autodesk Design Review
  • Autodesk Design Suites
  • Autodesk Ecotect
  • autodesk exchange apps
  • Autodesk Fabrication Specialization
  • autodesk file crash
  • autodesk forum
  • Autodesk Gallery
  • Autodesk Green Building Studio
  • Autodesk Impression
  • autodesk infrastructure modeler
  • Autodesk Instructor Certification
  • Autodesk Labs
  • Autodesk License Manager
  • Autodesk licensing
  • Autodesk M&E
  • Autodesk Maya
  • Autodesk MEP
  • Autodesk MEP 2014
  • autodesk mep systems specialization
  • autodesk mosaic
  • Autodesk Navisworks
  • Autodesk Navisworks 2012
  • Autodesk Navisworks 2013
  • Autodesk Navisworks 2014
  • Autodesk Navisworks Manage
  • Autodesk Navisworks Simulate
  • Autodesk Partner
  • Autodesk Product Support Specialization
  • Autodesk Quantity Takeoff
  • Autodesk ReCap
  • Autodesk Reseller
  • Autodesk Revit
  • Autodesk Revit 2012
  • Autodesk Revit 2013
  • Autodesk Revit 2014
  • autodesk revit architecture
  • Autodesk Revit Architecture 2012
  • autodesk revit architecture 2013
  • Autodesk Revit Architecture 2014
  • Autodesk Revit MEP
  • Autodesk Revit MEP 2013
  • Autodesk Revit MEP 2014
  • Autodesk Revit Structure 2013
  • Autodesk Revit Structure 2014
  • autodesk roadway design
  • Autodesk Showcase
  • autodesk simulation specialization
  • Autodesk SketchBook Pro
  • Autodesk Software
  • Autodesk software installation
  • autodesk specialization
  • Autodesk Structural Engineering Specialization
  • Autodesk Subscription
  • Autodesk Technical Support
  • autodesk training
  • Autodesk University
  • Autodesk Vault
  • AutoLISP
  • Axis
  • Below Ribbon
  • Bentley
  • Best Practices
  • Beyond the Basics
  • bill johnson
  • BIM
  • BIM 360 Field
  • BIMLink
  • bimlink for revit
  • blame
  • Bob Palioca
  • Bradley Cooley
  • BUGIE
  • Building Design Suite
  • building information modeling
  • Bullit Center
  • business
  • Business Analysis
  • BVN Architecture
  • CAD
  • CAD Files in Revit
  • CAD Files. Eugene O'Day
  • CAD Imports
  • CAD Links
  • CADLearning
  • CADLearning Portal
  • Certified Instructor
  • change
  • Citrix
  • Civil
  • Civil 101
  • Civil 3D
  • Civil 3D 2012
  • Civil 3D 2014
  • Civil 3D Fundamentals
  • civil 3D.
  • clash detective
  • Clinton Maulder
  • Cloud
  • cloud 360
  • CloudOn
  • COBie
  • COBie Guide
  • collaborate
  • Collaboration
  • Command Line
  • Commandline
  • commitment
  • Common Materials
  • Competition
  • Conduit Size
  • consulting
  • continuing education
  • corporate culture
  • corridor solids
  • create pipe table
  • create structure table
  • CSV
  • customer satisfaction
  • Cyclone
  • Data
  • Data References
  • Data Shortcuts
  • data sources
  • David Haynes
  • Derek Wielkopolski
  • Diagrammatic 3D views
  • Differentiator
  • Digital Entertainment
  • Displaced Views
  • Displacement
  • disruptive
  • DOE Solar Decathlon
  • drawing audit
  • Dropbox
  • Duct Pipe Elbow Specific Angle
  • DWF
  • dwg
  • Eagle Point
  • Ecotect
  • Ecotect Analysis
  • Edit Materials
  • Edith Green Wendell Wyatt
  • eLearning
  • Electrical Fundamentals
  • elevation analysis
  • enhanced rebar shapes
  • Environmental Science Associates
  • ESA
  • Eugene O'Day
  • Excel
  • Excel to Revit
  • Exploded Axonometric
  • Exploded Isometric
  • Explorer
  • Export
  • export to DGN
  • export to excel
  • FARO
  • fatal error
  • File Repathing
  • File Support
  • File Type
  • FILEDIA
  • Fitting
  • FUD
  • Gary M. Davis
  • gaurav bagga
  • gis
  • Glynnis Patterson
  • Google Maps
  • Google Sheet
  • Green BIM Basics
  • Green Building Studio
  • Hague Justice Portal
  • highways
  • HMC Architects
  • hsw credits
  • Ideate
  • Ideate BIMLink
  • Ideate BIMLink for Revit 2013
  • Ideate BIMLink for Revit 2014
  • Ideate BIMLink for Revit 2014.1
  • Ideate BIMLink Survey
  • Ideate Consulting
  • Ideate Explorer
  • Ideate Explorer for Revit
  • Ideate Explorer for Revit 2013
  • Ideate Explorer for Revit 2014
  • Ideate Inc.
  • Ideate presents
  • IdeateBIMLink
  • IdeateInc
  • improvement
  • IMSCAD
  • Inc.
  • InfaWorks
  • Infrastructure
  • Infrastructure Design Suite
  • Infrastructure Modeler
  • Infrastructure Modeler 2014
  • InfraWorks
  • InfraWorks 360
  • Infraworks R2
  • Inroads
  • Interior Designers
  • Intersection Design Tool
  • intuition
  • Inventor
  • IPD
  • James Cowan
  • Jasmax
  • Javascript
  • Jeld-Wen Field
  • Jim Cowan
  • Jim Quanci
  • Jobsite Inspections
  • Kasian Architecture
  • kate ming
  • Laser Scan
  • Layer Key Style
  • Layer Standard
  • Lean
  • LEED
  • LEED AP
  • LEED Gold
  • Leica
  • license cascading
  • License Manager
  • LIDAR
  • lionakis
  • Lock
  • Lookup Table
  • LPAS Architecture and Design
  • M&E
  • Mac OS
  • Manage Paths
  • Map 3D
  • Marcel de Jong
  • Mark Schoennagel
  • Material Editor
  • Material Library
  • Materials
  • matt miyamoto
  • Maya
  • Maya LT
  • Measurement
  • Mechanical and Plumbing
  • mentor
  • mep
  • MEP 2014
  • MEP Ideate
  • MEP IDeate
  • Microsoft Windows 8
  • Mobile
  • Mobile Apps
  • Model
  • MotionBuilder
  • Move Objects away
  • Mudbox
  • Multi Rebar Annotation
  • Navisworks
  • Navisworks 2014
  • Navisworks Manage
  • negotiation
  • network
  • network deployments
  • Nicholas M Kramer
  • ObjectARX
  • Objects & Label Styles
  • OS X
  • PAE Consulting Engineers
  • Parallel
  • Parallels
  • PAT files
  • Patterns
  • Perpendicular
  • Phased Based
  • Phillippi Engineering
  • Photometric Lights
  • Pipe Network
  • Planning
  • PMI
  • PMP
  • point cloud
  • Point Clouds
  • POINTCLOUD
  • polyline
  • post-mortem
  • preparation
  • Presentations
  • Pressure Network
  • Pressure Pipe
  • Pressure Pipe Networks
  • Pressure Pipe References
  • Pressure Pipe Shortcuts
  • Product Key
  • project galileo
  • project management
  • Project Management Institute
  • Project Management Professional
  • Project Manager
  • Project Neon
  • project silverstar
  • Properties
  • Property Set Definition
  • Proposals
  • PSD Schedule
  • quantity takeoff
  • Randomization
  • RCP
  • RCS
  • Reality Capture
  • RealWorks
  • Rebar Constraints
  • Rebar documentation
  • Recap
  • Registry
  • Reinforcement Rebar Enhancements
  • Reinforcement Rounding
  • Rendering
  • requirements
  • Review
  • Revit
  • Revit 201
  • Revit 2013
  • Revit 2013.3
  • Revit 2014
  • Revit 2014 Model Performance Technical Note
  • Revit Architecture
  • Revit Architecture 2014
  • Revit Architecture Fundamentals
  • revit building information model
  • Revit elevation
  • Revit error
  • Revit Families
  • revit forum
  • Revit Ideate "Ideate Inc." Parameter Variance Vary Group
  • Revit MEP
  • revit mep 2012
  • Revit MEP 2014
  • Revit Model
  • revit multi-category
  • Revit Railings
  • revit schedule
  • revit schedules
  • Revit Server
  • Revit Server 2013
  • Revit Stairs
  • Revit Structure
  • Revit Structure 2012
  • Revit Structure 2014
  • Revit Technology Conference
  • Revit Tip
  • Revit to Excel
  • Revit tool
  • Revit Training
  • Revit User Group
  • Risk
  • roads
  • Robert Palioca
  • Ron Palma
  • RonPalmaAEC
  • Room Aware Families
  • Room Calculation Point
  • RTC
  • RTC Europe
  • RTCUSA
  • RVT
  • sash kazeminejad
  • Scan Data
  • Scanning
  • Scenarios
  • Scoping
  • scripts
  • Selling
  • Services
  • settings
  • SFRUG
  • shruti harve
  • Signage
  • Site tools
  • SketchBook Designer
  • SketchBook Designer 2013
  • Sketchbook Mobile
  • Sketchbook Mobile Express
  • SketchUp
  • solution
  • Spreadsheet
  • Stair Functionality
  • Stairs and Railings
  • Storm and Sanitary Analysis
  • strategy
  • Structural Analytical Model Improvements
  • Structural Rebar
  • Support
  • surface analysis
  • survey
  • Switch Geometry Order
  • SWOT
  • sync settings
  • syncing settings
  • Systems
  • tech support
  • technology
  • Temporary View Properties
  • thinking
  • Time of Flight
  • Tooltip
  • travel
  • Trillium Creek
  • Trimble
  • USGBC
  • Value
  • Vasari
  • Vault
  • VDC
  • View Properties Temporary
  • Virtualization
  • VM Ware
  • Wayfinding
  • William Johnson
  • Windows
  • Windows 8
  • Windows Server 2012
  • workflows
  • Workset
  • worksharing
  • Workspace
  • Xgen

Blog Archive

  • ▼  2013 (204)
    • ▼  November (15)
      • Negotiate - What you do every day
      • eLearning – Upcoming Classes
      • Classroom Training – Open Revit Classes
      • The Benefit of Failure
      • Ideate, Inc. Features Lionakis in Its First Ideate...
      • What's in a Multi-Category Schedule?
      • Commitment to Change
      • Workset Reporting with Ideate Explorer for Revit
      • Classroom Training – Open Revit Classes
      • eLearning – Upcoming Classes
      • When am I done? Why is the customer unhappy?
      • Classroom Training – Open Revit Classes
      • Ideate Presents: Autodesk Digital Entertainment SF...
      • eLearning – Upcoming Classes
      • Big Red Button vs. Elephant Eating
    • ►  October (19)
    • ►  September (14)
    • ►  August (18)
    • ►  July (23)
    • ►  June (14)
    • ►  May (25)
    • ►  April (31)
    • ►  March (15)
    • ►  February (11)
    • ►  January (19)
  • ►  2012 (204)
    • ►  December (13)
    • ►  November (14)
    • ►  October (19)
    • ►  September (18)
    • ►  August (19)
    • ►  July (12)
    • ►  June (17)
    • ►  May (23)
    • ►  April (27)
    • ►  March (19)
    • ►  February (10)
    • ►  January (13)
  • ►  2011 (92)
    • ►  December (10)
    • ►  November (9)
    • ►  October (16)
    • ►  September (13)
    • ►  August (19)
    • ►  July (14)
    • ►  June (11)
Powered by Blogger.

About Me

Unknown
View my complete profile